+- منتدى فيجوال بيسك لكل العرب | منتدى المبرمجين العرب (http://vb4arb.com/vb)
+-- قسم : قسم لغة الفيجوال بيسك VB.NET (http://vb4arb.com/vb/forumdisplay.php?fid=182)
+--- قسم : قسم اسئلة VB.NET (http://vb4arb.com/vb/forumdisplay.php?fid=183)
+--- الموضوع : استفسار عن اتجاه النص في ثيم (/showthread.php?tid=14265)
استفسار عن اتجاه النص في ثيم - نسيم الترك1 - 29-12-15
اخواني قمت بتركيب عدة ثيمات لمشروعي ولكن تواجهني مشكلة وهي عند تحويل اتجاه اداة موجوده بالثيم من اليسار الى اليمين يصبح النص معكوس وللتوضيح سوف ارفق صورتين للتوضيح
عندما يكون اتجاه الاداه على اليسار يكون النص تمام كما بالصوره
المشكله عند تحويل الاداه الى الجهة اليمنى يصبح النص كما بالصوره معكوس
ارجو من لديه الحل افادتنا
RE: استفسار عن اتجاه النص في ثيم - silverlight - 29-12-15
لازم تستخدم +GDI لكي ترسم التكست في الحدث Paint عند استخدام RightToLeft ومن الواضح ان الكونترول المستخدم لا يدعم هذه الخاصية
عموما إن لم تكن تجيد عمليات الرسم
حاول أن تقوم بخداع نظام التشغيل حين يقوم بعملية الرسم .... لكني لا أعلم هل هذا سيفلح معك ام لا .... لكن الفكرة تكمن في أن تقوم بعمل Reverse للحروف قبل الانتقال من اليسار الي اليمين
ايضا يمكنك ان تقوم بتعديل اماكن الكونترول برمجيا LayoutControl بأنك تحسب مكان كل كوترول ثم تقوم بتغير Location الخاص به و من الواضح انك فقط تحتاج الي تعديل location للنقطة X لا غير
RE: استفسار عن اتجاه النص في ثيم - نسيم الترك1 - 29-12-15
كل ما يهمني بالثيم هي اداة tabcontrol
RE: استفسار عن اتجاه النص في ثيم - sami2015 - 29-12-15
[/php]
#Region "MephTabcontrol"
Class MephTabcontrol : Inherits TabControl
Public Function RoundRect(ByVal Rectangle As Rectangle, ByVal Curve As Integer) As GraphicsPath
Dim P As GraphicsPath = New GraphicsPath()
Dim ArcRectangleWidth As Integer = Curve * 2
P.AddArc(New Rectangle(Rectangle.X, Rectangle.Y, ArcRectangleWidth, ArcRectangleWidth), -180, 90)
P.AddArc(New Rectangle(Rectangle.Width - ArcRectangleWidth + Rectangle.X, Rectangle.Y, ArcRectangleWidth, ArcRectangleWidth), -90, 90)
P.AddArc(New Rectangle(Rectangle.Width - ArcRectangleWidth + Rectangle.X, Rectangle.Height - ArcRectangleWidth + Rectangle.Y, ArcRectangleWidth, ArcRectangleWidth), 0, 90)
P.AddArc(New Rectangle(Rectangle.X, Rectangle.Height - ArcRectangleWidth + Rectangle.Y, ArcRectangleWidth, ArcRectangleWidth), 90, 90)
P.AddLine(New Point(Rectangle.X, Rectangle.Height - ArcRectangleWidth + Rectangle.Y), New Point(Rectangle.X, Curve + Rectangle.Y))
Return P
End Function
Public Function RoundRect(ByVal X As Integer, ByVal Y As Integer, ByVal Width As Integer, ByVal Height As Integer, ByVal Curve As Integer) As GraphicsPath
Dim Rectangle As Rectangle = New Rectangle(X, Y, Width, Height)
Dim P As GraphicsPath = New GraphicsPath()
Dim ArcRectangleWidth As Integer = Curve * 2
P.AddArc(New Rectangle(Rectangle.X, Rectangle.Y, ArcRectangleWidth, ArcRectangleWidth), -180, 90)
P.AddArc(New Rectangle(Rectangle.Width - ArcRectangleWidth + Rectangle.X, Rectangle.Y, ArcRectangleWidth, ArcRectangleWidth), -90, 90)
P.AddArc(New Rectangle(Rectangle.Width - ArcRectangleWidth + Rectangle.X, Rectangle.Height - ArcRectangleWidth + Rectangle.Y, ArcRectangleWidth, ArcRectangleWidth), 0, 90)
P.AddArc(New Rectangle(Rectangle.X, Rectangle.Height - ArcRectangleWidth + Rectangle.Y, ArcRectangleWidth, ArcRectangleWidth), 90, 90)
P.AddLine(New Point(Rectangle.X, Rectangle.Height - ArcRectangleWidth + Rectangle.Y), New Point(Rectangle.X, Curve + Rectangle.Y))
Return P
End Function
Sub New()
SetStyle(ControlStyles.AllPaintingInWmPaint Or ControlStyles.ResizeRedraw Or ControlStyles.UserPaint Or ControlStyles.DoubleBuffer, True)
DoubleBuffered = True
SizeMode = TabSizeMode.Fixed
ItemSize = New Size(35, 85)
End Sub
Protected Overrides Sub CreateHandle()
MyBase.CreateHandle()
Alignment = TabAlignment.Left
End Sub
Function ToPen(ByVal color As Color) As Pen
Return New Pen(color)
End Function
Function ToBrush(ByVal color As Color) As Brush
Return New SolidBrush(color)
End Function
Protected Overrides Sub OnPaint(ByVal e As PaintEventArgs)
Dim B As New Bitmap(Width, Height)
Dim G As Graphics = Graphics.FromImage(B)
Dim FF As New Font("Verdana", 8, FontStyle.Regular)
Try : SelectedTab.BackColor = Color.FromArgb(50, 50, 50) : Catch : End Try
G.Clear(Parent.FindForm.BackColor)
G.FillRectangle(New SolidBrush(Color.FromArgb(50, 50, 50)), New Rectangle(0, 0, ItemSize.Height + 3, Height - 1)) 'Full Tab Background
For i = 0 To TabCount - 1
If i = SelectedIndex Then
Dim x2 As Rectangle = New Rectangle(New Point(GetTabRect(i).Location.X - 2, GetTabRect(i).Location.Y - 2), New Size(GetTabRect(i).Width + 3, GetTabRect(i).Height - 1))
Dim myBlend As New ColorBlend()
myBlend.Colors = {Color.FromArgb(50, 50, 50), Color.FromArgb(50, 50, 50), Color.FromArgb(50, 50, 50)} 'Full Tab Background Gradient Accents
myBlend.Positions = {0.0F, 0.5F, 1.0F}
Dim lgBrush As New LinearGradientBrush(x2, Color.Black, Color.Black, 90.0F)
lgBrush.InterpolationColors = myBlend
G.FillRectangle(lgBrush, x2)
'G.DrawRectangle(New Pen(Color.FromArgb(20, 20, 20)), x2) 'Full Tab Highlight Outline
Dim tabRect As New Rectangle(GetTabRect(i).Location.X + 4, GetTabRect(i).Location.Y + 2, GetTabRect(i).Size.Width + 10, GetTabRect(i).Size.Height - 11)
G.FillPath(New SolidBrush(Color.FromArgb(50, 50, 50)), RoundRect(tabRect, 4)) 'Highlight Fill Background
Dim cFull As Color() = New Color() {Color.FromArgb(20, 20, 20), Color.FromArgb(40, 40, 40), Color.FromArgb(45, 45, 45), Color.FromArgb(46, 46, 46), Color.FromArgb(47, 47, 47), Color.FromArgb(48, 48, 48), Color.FromArgb(49, 49, 49), Color.FromArgb(50, 50, 50)}
Draw.InnerGlow(G, New Rectangle(0, 0, ItemSize.Height + 3, Height - 1), cFull) ' Main Left Box Outline
Dim cHighlight As Color() = New Color() {Color.FromArgb(20, 20, 20), Color.FromArgb(40, 40, 40), Color.FromArgb(45, 45, 45), Color.FromArgb(46, 46, 46), Color.FromArgb(47, 47, 47), Color.FromArgb(48, 48, 48), Color.FromArgb(49, 49, 49), Color.FromArgb(50, 50, 50)}
Draw.InnerGlowRounded(G, tabRect, 4, cHighlight) ' Fill HighLight Inner
G.SmoothingMode = SmoothingMode.HighQuality
'Dim p() As Point = {New Point(ItemSize.Height - 3, GetTabRect(i).Location.Y + 20), New Point(ItemSize.Height + 4, GetTabRect(i).Location.Y + 14), New Point(ItemSize.Height + 4, GetTabRect(i).Location.Y + 27)}
'G.FillPolygon(Brushes.White, p)
If ImageList IsNot Nothing Then
Try
If ImageList.Images(TabPages(i).ImageIndex) IsNot Nothing Then
G.DrawImage(ImageList.Images(TabPages(i).ImageIndex), New Point(x2.Location.X + 8, x2.Location.Y + 6))
DrawString(G, " " & TabPages(i).Text.ToUpper, FF, Brushes.White, x2)
Else
DrawString(G, TabPages(i).Text, FF, Brushes.White, x2)
End If
Catch ex As Exception
DrawString(G, TabPages(i).Text, FF, Brushes.White, x2)
End Try
Else
DrawString(G, TabPages(i).Text, FF, Brushes.White, x2)
End If
G.DrawLine(New Pen(Color.FromArgb(96, 110, 121)), New Point(x2.Location.X - 1, x2.Location.Y - 1), New Point(x2.Location.X, x2.Location.Y))
G.DrawLine(New Pen(Color.FromArgb(96, 110, 121)), New Point(x2.Location.X - 1, x2.Bottom - 1), New Point(x2.Location.X, x2.Bottom))
Else
Dim x2 As Rectangle = New Rectangle(New Point(GetTabRect(i).Location.X - 2, GetTabRect(i).Location.Y - 2), New Size(GetTabRect(i).Width + 3, GetTabRect(i).Height + 1))
'G.FillRectangle(New SolidBrush(Color.FromArgb(50, 50, 50)), x2) 'Tab Highlight
G.DrawLine(New Pen(Color.FromArgb(96, 110, 121)), New Point(x2.Right, x2.Top), New Point(x2.Right, x2.Bottom))
If ImageList IsNot Nothing Then
Try
If ImageList.Images(TabPages(i).ImageIndex) IsNot Nothing Then
G.DrawImage(ImageList.Images(TabPages(i).ImageIndex), New Point(x2.Location.X + 8, x2.Location.Y + 6))
DrawString(G, TabPages(i).Text, FF, Brushes.White, x2)
Else
DrawString(G, TabPages(i).Text, FF, New SolidBrush(Color.FromArgb(210, 220, 230)), x2)
End If
Catch ex As Exception
DrawString(G, TabPages(i).Text, FF, New SolidBrush(Color.FromArgb(210, 220, 230)), x2)
End Try
Else
DrawString(G, TabPages(i).Text, FF, New SolidBrush(Color.FromArgb(210, 220, 230)), x2)
End If
End If
G.FillRectangle(New SolidBrush(Color.FromArgb(50, 50, 50)), New Rectangle(86, -1, Width - 86, Height + 1)) 'Page Fill Full
Dim c As Color() = New Color() {Color.FromArgb(20, 20, 20), Color.FromArgb(40, 40, 40), Color.FromArgb(45, 45, 45), Color.FromArgb(46, 46, 46), Color.FromArgb(47, 47, 47), Color.FromArgb(48, 48, 48), Color.FromArgb(49, 49, 49), Color.FromArgb(50, 50, 50)}
Draw.InnerGlowRounded(G, New Rectangle(86, 0, Width - 87, Height - 1), 3, c) ' Fill Page
Next
G.DrawRectangle(New Pen(New SolidBrush(Color.FromArgb(50, 50, 50))), New Rectangle(0, 0, ItemSize.Height + 4, Height - 1)) 'Full Tab Outer Outline
G.DrawRectangle(New Pen(New SolidBrush(Color.FromArgb(20, 20, 20))), New Rectangle(1, 0, ItemSize.Height + 3, Height - 2)) 'Full Tab Inner Outline
e.Graphics.DrawImage(B.Clone, 0, 0)
'e.Graphics.DrawImage(B.Clone, New Rectangle(0, 0, Me.Width + 1, Me.Height))
G.Dispose() : B.Dispose()
End Sub
Protected Sub DrawString(ByVal g As Graphics, ByVal txt As String, ByVal fnt As Font, ByVal clr As Brush, ByVal rec As Rectangle)
If Me.RightToLeft = Windows.Forms.RightToLeft.Yes And Me.RightToLeftLayout = True Then
g.MultiplyTransform(New System.Drawing.Drawing2D.Matrix(-1, 0, 0, 1, rec.Width, 0))
g.DrawString(txt, fnt, New SolidBrush(Color.FromArgb(210, 220, 230)), New Rectangle(rec.X, rec.Y - 1, rec.Width, rec.Height), New StringFormat With {.LineAlignment = StringAlignment.Center, .Alignment = StringAlignment.Center})
g.ResetTransform()
Else
g.DrawString(txt, fnt, New SolidBrush(Color.FromArgb(210, 220, 230)), New Rectangle(rec.X, rec.Y - 1, rec.Width, rec.Height), New StringFormat With {.LineAlignment = StringAlignment.Center, .Alignment = StringAlignment.Center})
End If
End Sub
End Class
#End Region
[/php]
RE: استفسار عن اتجاه النص في ثيم - نسيم الترك1 - 29-12-15
يسلمووووووو اخي على ردك ومساعدتك
ولكن ارجوا ان تخبرني ما هو الكود الذي قمت بالتعديل عليه لكي اقوم بالتعديل على باقي الثيمات
RE: استفسار عن اتجاه النص في ثيم - silverlight - 29-12-15
اذا كنت ترييد التغيير في الكونترول الخاص بك عليك ان ترفع الكود لكي نستطيع ضبط عملية الرسم الخاصة به
لأنكــ ف النهاية ستحتاج للتعديل علي الكونترول حتي تتم عملية الرسم بالشكل المناسب
,أو لو كان الكود الخاص بالاخ Sami2105 يناسبك فاستخدم الكونترول الخاص به
RE: استفسار عن اتجاه النص في ثيم - نسيم الترك1 - 29-12-15
هذا هو الكود اخي
ولكن لو ما في غلبه كمان اريد ان اعرف ما الذي يجب تغيره في الكود في حال اردت تغيير ثيم اخر
RE: استفسار عن اتجاه النص في ثيم - sami2015 - 30-12-15
#Region "SLCTabControl"
Class SLCTabControl
Inherits TabControl
Sub New()
SetStyle(ControlStyles.AllPaintingInWmPaint Or ControlStyles.OptimizedDoubleBuffer Or ControlStyles.ResizeRedraw Or ControlStyles.UserPaint, True)
DoubleBuffered = True
SizeMode = TabSizeMode.Fixed
ItemSize = New Size(30, 120)
End Sub
Protected Overrides Sub CreateHandle()
MyBase.CreateHandle()
Alignment = TabAlignment.Left
End Sub
Public Function Borderpts() As GraphicsPath
Dim P As New GraphicsPath()
Dim PS As New List(Of Point)
PS.Add(New Point(0, 0))
PS.Add(New Point(Width - 1, 0))
PS.Add(New Point(Width - 1, Height - 1))
PS.Add(New Point(0, Height - 1))
P.AddPolygon(PS.ToArray())
Return P
End Function
Public Function BorderptsInside() As GraphicsPath
Dim P As New GraphicsPath()
Dim PS As New List(Of Point)
PS.Add(New Point(1, 1))
PS.Add(New Point(122, 1))
PS.Add(New Point(122, Height - 2))
PS.Add(New Point(1, Height - 2))
P.AddPolygon(PS.ToArray())
Return P
End Function
Public Function BigBorder() As GraphicsPath
Dim P As New GraphicsPath()
Dim PS As New List(Of Point)
PS.Add(New Point(50, 1))
PS.Add(New Point(349, 50))
PS.Add(New Point(349, 50))
PS.Add(New Point(50, 349))
P.AddPolygon(PS.ToArray())
Return P
End Function
Protected Overrides Sub OnPaint(ByVal e As System.Windows.Forms.PaintEventArgs)
Dim b As New Bitmap(Width, Height)
Dim g As Graphics = Graphics.FromImage(b)
g.Clear(Color.White)
'//Big square shadow
Dim GP1 As GraphicsPath = Borderpts()
g.DrawPath(Pens.LightGray, GP1)
'// small border
Dim tmp1 As GraphicsPath = BorderptsInside()
Dim PB2 As PathGradientBrush
PB2 = New PathGradientBrush(tmp1)
PB2.CenterColor = Color.FromArgb(250, 250, 250)
PB2.SurroundColors = {Color.FromArgb(237, 237, 237)}
PB2.FocusScales = New PointF(0.9F, 0.9F)
g.FillPath(PB2, tmp1)
g.DrawPath(Pens.Gray, tmp1)
'// items
For i = 0 To TabCount - 1
Dim rec As Rectangle = GetTabRect(i)
Dim rec2 As Rectangle = rec
'//inside small
rec2.Width -= 3
rec2.Height -= 3
rec2.Y += 1
rec2.X += 1
If i = SelectedIndex Then
Dim linear As New LinearGradientBrush(New Rectangle(rec2.X + 108, rec2.Y + 1, 10, rec2.Height - 1), Color.FromArgb(227, 227, 227), Color.Transparent, 180.0F)
Dim linear3 As New LinearGradientBrush(New Rectangle(rec2.X, rec2.Y + 1, 10, rec2.Height - 1), Color.FromArgb(227, 227, 227), Color.Transparent, 180.0F)
g.FillRectangle(New SolidBrush(Color.FromArgb(242, 242, 242)), rec2)
g.DrawRectangle(Pens.White, rec2)
g.DrawRectangle(New Pen(Color.FromArgb(70, Color.FromArgb(39, 93, 127)), 2), rec)
g.FillRectangle(linear, New Rectangle(rec2.X + 113, rec2.Y + 1, 6, rec2.Height - 1))
g.FillRectangle(linear3, New Rectangle(rec2.X, rec2.Y + 1, 6, rec2.Height - 1))
'// circle
g.SmoothingMode = SmoothingMode.HighQuality
' g.DrawEllipse(New Pen(Color.FromArgb(200, 200, 200), 3), New Rectangle(rec2.X + 6.5, rec2.Y + 7, 14, 14))
' g.DrawEllipse(New Pen(Color.FromArgb(150, 150, 150), 1), New Rectangle(rec2.X + 6.5, rec2.Y + 7, 14, 14))
Dim GPF As New GraphicsPath
GPF.AddEllipse(New Rectangle(rec2.X + 8, rec2.Y + 8, 12, 12))
Dim PB3 As PathGradientBrush
PB3 = New PathGradientBrush(GPF)
PB3.CenterPoint = New Point(rec2.X - 10, rec2.Y - 10)
PB3.CenterColor = Color.FromArgb(56, 142, 196)
PB3.SurroundColors = {Color.FromArgb(64, 106, 140)}
PB3.FocusScales = New PointF(0.9F, 0.9F)
g.FillPath(PB3, GPF)
g.DrawPath(New Pen(Color.FromArgb(49, 63, 86)), GPF)
g.SetClip(GPF)
g.FillEllipse(New SolidBrush(Color.FromArgb(40, Color.WhiteSmoke)), New Rectangle(rec2.X + 10.5, rec2.Y + 11, 6, 6))
g.ResetClip()
g.SmoothingMode = SmoothingMode.None
Else
g.SmoothingMode = SmoothingMode.HighQuality
Dim linear As New LinearGradientBrush(New Rectangle(rec2.X + 108, rec2.Y + 1, 10, rec2.Height - 1), Color.FromArgb(227, 227, 227), Color.Transparent, 180.0F)
Dim linear3 As New LinearGradientBrush(New Rectangle(rec2.X, rec2.Y + 1, 10, rec2.Height - 1), Color.FromArgb(227, 227, 227), Color.Transparent, 180.0F)
g.FillRectangle(New SolidBrush(Color.FromArgb(242, 242, 242)), rec2)
g.DrawRectangle(Pens.White, rec2)
g.DrawRectangle(New Pen(Color.FromArgb(70, Color.FromArgb(39, 93, 127)), 2), rec)
g.FillRectangle(linear, New Rectangle(rec2.X + 113, rec2.Y + 1, 6, rec2.Height - 1))
g.FillRectangle(linear3, New Rectangle(rec2.X, rec2.Y + 1, 6, rec2.Height - 1))
g.FillEllipse(Brushes.LightGray, New Rectangle(rec2.X + 8, rec2.Y + 8, 12, 12))
g.DrawEllipse(New Pen(Color.FromArgb(100, 100, 100), 1), New Rectangle(rec2.X + 8, rec2.Y + 8, 12, 12))
g.SmoothingMode = SmoothingMode.None
End If
If Me.RightToLeft = Windows.Forms.RightToLeft.Yes And Me.RightToLeftLayout = True Then
g.MultiplyTransform(New System.Drawing.Drawing2D.Matrix(-1, 0, 0, 1, rec.Width, 0))
g.DrawString(TabPages(i).Text, Font, New SolidBrush(Color.FromArgb(56, 106, 137)), rec, New StringFormat With {.Alignment = StringAlignment.Center, .LineAlignment = StringAlignment.Center})
g.ResetTransform()
Else
g.DrawString(TabPages(i).Text, Font, New SolidBrush(Color.FromArgb(56, 106, 137)), rec, New StringFormat With {.Alignment = StringAlignment.Center, .LineAlignment = StringAlignment.Center})
End If
Next
e.Graphics.DrawImage(b.Clone, 0, 0)
g.Dispose()
b.Dispose()
MyBase.OnPaint(e)
End Sub
End Class
#End Region
RE: استفسار عن اتجاه النص في ثيم - نسيم الترك1 - 30-12-15
مشكور اخي ويعطيك العافيه